| |
TD5050 |
| Engine |
|
| Type |
4-cycle, diesel |
| Make |
New Holland |
| Model |
NEF |
| Cylinders/Aspiration |
4 / Turbocharged and intercooled |
| Displacement |
274 cu. in. (4.5 L) |
| Block Type |
Parent Bore |
| Rated Speed |
2500 RPM |
| Gross Engine Horsepower |
93 |
| PTO Horsepower |
80 |
| Torque Rise |
44% |
| Emission Legislation |
Tier III |
| Fuel, Air and Lubrication System |
|
| Injection Pump |
Bosch/Rotary |
| Injector Type |
Direct |
| Fuel Filter Type |
Dual stage fuel filtering system with water/sediment separator followed by a paper filter element cartridge |
| Fuel Tank Capacity |
23.8 gal (90.0 L) |
| Auxilary Fuel Tank Capacity, Opt |
7.0 gal (26.5 L) |
| Fuel Type |
B100 Biodiesel (meeting ASTM 6751 standards) and/or standard diesel fuels |
| Air Filter Type |
Dry / Dual Element |
| Oil and Filter Service |
600 hours |
| Muffler |
Under hood |
| Exhaust Outlet |
Right side of hood |
| Transmission |
|
| Base Equipment Transmission |
12Fx12R with synchronized mechanical shuttle (4 synchronized speeds in 3 non-synchronized ranges, dedicated left hand shuttle) |
| Optional Transmission |
20Fx12R creeper with synchronized mechanical shuttle (4 synchronized speeds in 3 non-synchronized ranges, creeper operates in lower 2 ranges) |
| Traction Clutch |
Dry / 12-inch (305 mm) diameter, heavy-duty cerametallic material |
| Base Equipment |
|
| Transmission Speed** |
1.1 - 17.6 mph (1.7 - 28.3 kph) |
| Optional Transmission Speed** |
1.1 - 17.6 mph (1.7 - 28.3 kph) |
| Hydraulics |
|
| System Type |
Open center, fixed displacement gear pump |
| Implement Pump Flow |
16.1 gpm (60.9 L/min) |
| Steering & Services Pump Flow |
9.5 gpm (36.0 L/min) |
| Remotes |
1 (Base Equipment) / 3 (Optional) |
| 3-Point Hitch |
|
| Category |
II |
| Draft Sensing |
Mechanical, lower link sensing |
| Std ASAE Lift Capacity @ 24in. |
5025 lbs. (2279 kg) |
| Link Arms |
Flexible |
| Stabilizers |
Telescoping |
| Upper/Lower Limit Setting |
Lift-O-Matic |
| PTO |
|
| Type |
Fully independent |
| PTO speed |
|
| Base Equipment |
540 RPM |
| Optional |
540/1000 RPM |
| Operator Control |
One lever, mechanical engagement |
| PTO Clutch |
Dry, 11-in., organic plate |
| Front Axle |
|
| 2WD |
Heavy duty, adjustable, maximum axle capacity 5,732 lb. |
| Track Adjustment |
55.2 - 74.9 in. (1403 - 1903 mm) |
| Maximum Steering Angle |
55° |
| Oscillation |
11° |
| Steering Cylinder |
Contained behind main axle beam |
| FWD |
Center Differential with planetary final drives in wheel hubs, unrestricted axle capacity of 6,613 lb. |
| Track Adjustment |
61.4 - 78.7 in. (1560 - 2000 mm) |
| Maximum Steering Angle |
50° |
| Oscillation |
11° |
| Steering Cylinder |
Contained behind main axle beam |
| Front Differential Lock |
Limited slip |
| FWD Engagement |
Mechanical lever |
| Electrical |
|
| Battery |
12 volts / 800 cca |
| Alternator |
120 amps |
| Cold Start Aid |
Grid Heater |
| Lighting |
2 hi/lo beam headlights, 1 rear worklight,. (Cab has 2 additional front worklights and 1 additional rear worklight) |
| Accessory Power Outlets |
7-pin implement outlet, 4-pin (25Amp) outlet, 1-pin (8Amp) outlet |
| Fuses |
Automotive blade type |
| Approximate Weight |
|
| Less Cab (ROPS) |
|
| 2WD |
6702 lb. (3040 kg) |
| FWD |
7804 lb. (3540 kg) |
| Cab |
|
| 2WD |
7363 lb. (3340 kg) |
| FWD |
8333 lb. (3780 kg) |
| Approximate Dimensions |
|
| ROPS Height** |
107.7 in. (2735 mm) |
| Cab Height** |
102.4 in. (2602 mm) |
| Wheelbase |
|
| 2WD |
94.0 in. (2388 mm) |
| FWD |
91.8 in. (2332 mm) |
