Specifications: H5430 available from H&M Equipment, New York
| Model |
H5430 |
| Cross Conveyor | |
|
Width, in. (mm) |
42 (1067) |
|
Length, in. (mm) |
42 (1067) |
|
Conveyor Drive type |
Hydraulic |
|
Belt type |
Spliced |
|
Discharge side (right or left) |
Right- left to invert only |
|
Shiftable cross conveyor |
Not available |
|
Inverter chute option (yes/no) |
yes |
|
Optional conveyor extensions, ft. (mm) |
2 (610), 4 (1219), or 6 (1829) |
|
Optional conveyor- folding or fixed |
Hydraulically folding |
|
Conveyor extension shut-off |
Standard |
|
Cross conveyor shut-off kit |
Optional |
| Dimensions | |
|
Transport width, in. (m) |
184 (4.7) |
|
Transport length, in. (m) |
264 (6.7) |
|
Transport height, in. (mm) |
63 (1600) |
| Frame and Tongue | |
|
Type pull |
Side |
|
Tongue swing |
Hydraulic |
|
Ground clearance under raised pickup, in (mm) |
11.75 (298) |
|
Parking stand or jack |
Jack |
|
Transport safety chain |
Standard |
|
Transport lights |
Standard |
|
Recommended operating speeds, mph (k/h) |
2 to 12 (3.2 to 19.3) |
|
Maximum transport speed, mph (k/h) |
20 (32) |
|
Tractor control box |
Standard |
|
Wheels and tires (size) |
(1) 6.70 x 15 & (2) 9.5L x 15 |
|
Single axle |
Standard |
| Merging Capability - feet (m) of cut | |
|
Base unit |
9 to 12 (2.7 to 3.7) |
|
With 2-foot (.6 m) extension |
9 to 14 (2.7 to 4.3) / 9 to 16 (2.7 to 4.9)* |
|
With 4-foot (1.2 m) extension |
9 to 16 (2.7 to 4.9)/ 9 to 18 (2.7 to 5.5)* |
|
With 6-foot (1.8 m) extension |
9 to 18 (2.7 to 5.5) / use 4' (1.2) extension* |
| Pickup | |
|
Width, inches |
144 |
|
Type |
Spliced belt w/plastic fingers |
|
Pickup tooth type |
Replaceable 3-prong plastic |
|
Separate belt sections |
4 x 3’ (.9 m) |
|
Adjustable pickup and conveyor speed (Tractor driven) |
Tractor remote flow control |
|
Adjustable pickup and conveyor speed (Self-contained) |
Tractor PTO speed |
|
Floating pickup |
Standard, on gauge wheels |
|
Lift System |
Hydraulic |
|
Gauge wheels |
Standard |
|
Gauge wheel size |
5.70 x 8 |
|
Drive type |
Hydraulic |
|
Roller windguard |
Standard |
| Tractor Requirements | |
|
Hydraulic flow requirements, gpm @ psi (lpm @ bar) (w/tractor hydraulics) |
16 @ 2000 (61 @ 138) |
|
Hydraulic flow requirements, gpm @ psi (lpm @ bar) (w/self-contained hydraulics) |
5 @ 2000 (19 @ 138) |
|
Tractor remotes required |
2 w/tractor driven; 1 w/self-contained |
|
Remote hydraulics type |
Open or closed center |
|
Hydraulic remote valve type (w/tractor hydraulics) |
Double-acting w/detent and flow control on at least one valve |
|
Hydraulic remote valve type (w/self-contained hydraulics) |
Single or double acting |
|
Recommended tractor size |
70 HP (52 kW) |
|
Seven pin light connector |
X |
| Weight | |
|
Base unit weight, tractor hydraulics, lbs. (kg) |
3860 (1751) |
|
Base unit weight, self-contained hydraulics, lbs. (kg) |
4320 (1960) |