Specifications: DK45SE available from H&M Equipment, New York

 
Engine
Engine Model   4A220LWM
Engine Gross Power   45 HP (33.6 kw)
Rated Speed   2,600
No. of Cylinder   4
Fuel Type   Diesel
Aspiration   Natural
Displacement   134.06 cu. in. (2,197 cc)
Fuel Tank Capacity   11.9 gal. (45L)
Pre-heating System   Glow Plugs
Transmission
Transmission Type   Manual
Shuttle   Synchronized
Main Gear   Synchronized
No. of Travel Speed Forward / Reverse   F12/R12
Min. Travel Speed of Forward w/ Ag1 @ Engine rated speed   0.9 mph (1.5 kph)
Max. Travel Speed of Forward w/ Ag1 @ Engine rated speed   15.7 mph (25.3 kph)
Power Take-Off
PTO Type Trans   HYdraulic, Independent
PTO Power   38 HP (28.3 KW)
Rear PTO Speeds(1st)   540 rpm
Rear PTO Speeds(2nd)   N/A
Mid PTO Speeds   2,00 rpm (optional)
Front PTO Speeds    
Brakes and Clutch
Brakes   Wet Disc
Clutch   Dry Single
Dimensions w/ AG Tire
Length w/ 3-point hitch   134.2 in. (3.410 mm)
Width   63.9 in. (1,625 mm)
Height from Top of ROPS   96.2 in. (2,443 mm)
Height from Top of ROPS Cab   97.8 in. (2,485 mm)
Height from Top of ROPS Folded    
From Top of the Highest Point    
Wheelbase   74.00 in. (1,880 mm)
Ground Clearance   14.7 in. (375 mm)
Front Tread Ag Tires - Min   49.1 in. (1,248 mm)
Front Tread Ag Tires - Max    
Rear Tread Ag Tires - Min   49.7 in. (1,262 mm)
Rear Tread Ag Tires - Max   58.6 in. (1,490 mm)
Turning Radius w/ Brake   9.5 ft. (2.91 m)
Turning Radius w/o Brake    
Hydraulics
Total Pump Flow   16.8 gpm (63.9 L/min)
Main Pump Capacity    
Power Steering Pump Capacity    
3-Point Hitch
Standard Category (Optional Category)   Cat. I (N/A)
Lift Capacity, 24" aft of hitch, lb(kg)   2,493 lbs. (1,131 kg)
Control Type   Positino, Draft, Mixed
Weight
Weight w/ Ag Tires w/ ROPS   3,950 lbs. (1,792 kg)
Weight w/ Ag Tires w/ Cab   4,396lbs. (1,994 kg)