Specifications: DK35SE HST available from H&M Equipment, New York

 
Engine
Engine Model   3B183LWH
Engine Gross Power   38 HP (28.3KW)
Rated Speed   2,600 rpm
No. of Cylinder   3
Fuel Type   Diesel
Aspiration   Natural
Displacement   111.43 cu.in. (1,826 cc)
Fuel Tank Capacity   11.9 gal (45L)
Pre-heating System   Glow Plugs
Transmission
Transmission Type   Hydrostatic
Shuttle   N/A
Main Gear   Hydrostatic
No. of Travel Speed Forward / Reverse   3 Range HST
Min. Travel Speed of Forward w/ Ag1 @ Engine rated speed   0 mph (0 kph)
Max. Travel Speed of Forward w/ Ag1 @ Engine rated speed   14.9 mph (24 kph)
Power Take-Off
PTO Type Trans   Hydraulic, Independent
PTO Power   27 HP (ROPS)/ 26.1 HP (Cab)
Rear PTO Speeds(1st)   540 rpm
Rear PTO Speeds(2nd)   N/A
Mid PTO Speeds   2,000 rpm (Optional)
Front PTO Speeds    
Brakes and Clutch
Brakes   Wet disc
Clutch   N/A
Dimensions w/ AG Tire
Length w/ 3-point hitch   129.1 in. (3,280 mm)
Width   61.6 in. (1,565 mm)
Height from Top of ROPS   93.1 in. (2,365 mm)
Height from Top of ROPS Cab   95.3 in. (2,420 mm)
Height from Top of ROPS Folded    
From Top of the Highest Point    
Wheelbase   69.5 in. (1,767 mm)
Ground Clearance   14.3 in. (365 mm)
Front Tread Ag Tires - Min   49.1 in. (1,248 mm)
Front Tread Ag Tires - Max    
Rear Tread Ag Tires - Min   48.7 in. (1,237 mm)
Rear Tread Ag Tires - Max   53.0 in. (1,347 mm)
Turning Radius w/ Brake   9.3 ft (2.85 m)
Turning Radius w/o Brake    
Hydraulics
Total Pump Flow   15.2 gpm (57.8(L/min)
Main Pump Capacity    
Power Steering Pump Capacity    
3-Point Hitch
Standard Category (Optional Category)   Cat. I (N/A)
Lift Capacity, 24" aft of hitch, lb(kg)   2,383 lbs (1,081 kg)
Control Type   Position, Draft, Mixed control
Weight
Weight w/ Ag Tires w/ ROPS   3,668 lbs. (1,664 kg)
Weight w/ Ag Tires w/ Cab   4,133 lbs. (1,875 kg)